① 宝马E系底盘编程设码桥连不成功怎样解决
宝马E系底盘编程修改车辆配置详细步骤：
1、打开ISPI软件，获取车辆基本信息。
2、打开BMW Coding Tool软件，进入之后，选择车辆集成等级（车型数据库）。
3、点击Settings（设置），查看设码，桥接，编程的数据库路径。
② 宝马更换汽车电脑后哪些系统需要重新编程
更换那个模块电脑就做那个模块电脑的编程。比如更换BCM就只做BCM的编程就行了。你可以用MS Pro做这编程设码功能，还有故障码帮助功能。
③ 宝马电脑的编程
宝马汽车发动机电脑编程步骤DME Control Mole Programming
DME Control Mole Programming
DME programming is used to change a "basic control unit" into a "programed control unit" by writing operating instructions onto a blank EPROM.
Programming is also used to update an existing DME program by writing additional instructions that compliment the existing software.
Programming is used on DME M3.X variants.
Storage of Programming Data
In it's unprogrammed basic state, the EPROM only contains "resident data". The resident data provides control mole/EPROM identification to the
programming software prior to programming.
When programmed, the EPROM is filled with the required characteristic maps (ignition timing, injection etc), control mole constants,
Identification data, etc.
When is programming necessary?
Programming an engine control mole is necessary when:
- Installing a replacement basic control mole
- Recall or Service Action campaign: This falls into one of the following categories:
- Program update to existing program
- Complete programming procere after EPROM replacement.
Programming a replacement basic control mole
Control moles are received from the parts department in the basic state (EPROM loaded only with resident data). These control moles require
programming using the DIS/MoDiC and the latest programming software.
Programming Update
Updates are referred to as "Customer Service Measures" in the programming software. The existing program in the control mole is amended with
an updated program. This new data changes various operations of the existing control programming. Program updates write the new data in a
reserved section of the EPROM. The location of the old data is overwritten with instructions for the DME to search the reserved section in the
EPROM when the function is required.
Because of limited space on the EPROM, program updating can only be done one time.
The DIS/MoDiC will display the message "Measure not applicable to the control mole version" if update has already been done or the DME is
factory updated
Vehicle: Testing and Inspection
EPROM Replacement and Programming
EPROM Replacement and Programming
Larger updates have too many changes to fit in the update portion of the EPROM. An update with this many changes requires an EPROM
replacement and reprogramming procere.
The EPROM is removed and replaced with a new basic state EPROM. The latest software is programmed into the new EPROM providing a data
set that has the latest available software.
Vehicle: Testing and Inspection
Control Mole Identification
Control Mole Identification
It is important to know how to properly identify DME control moles prior to programming. The control moles are identified by:
- BMW Part number
- BMW Hardware number
- Bosch Hardware number
These numbers are displayed in the following locations:
- Control mole ID label.
- Control mole ID display using the Diagnostic program.
Part Number Basic Control Mole
This number refers to the part number of the control unit without any data status.
Part Number Programmed Control Mole
This number refers to the part number of a factory programmed mole that includes the data status.
④ 宝马单机版与宝马工程师版的区别是怎么样
宝马单机版是宝马4S店的服务器版的精简版，但这里说的精简并非功能简化，只是硬件的简化，原厂的服务器版用的硬件是松下台式机一体机，单机版用的是普通笔记本，这一点上面与宝马工程师版是一样的。
宝马工程师版与宝马单机版之间的区别就在于软件，宝马单机版的软件是中文版（当然也可以切换成外文），但是宝马工程师版的就没有中文版，只有英文加德文版，这是因为宝马的工程师版原来只是在宝马工厂使用，并不在全球的4S店流通使用；
另外一点就是功能了，功能上宝马单机版是用于做一般的汽车修理厂，4S店等用于常规维修保养、以及更换零件之后的编程设码用；而宝马工程师版是用于宝马车的改装，原厂升级高配置编程，宝马车英文改成中文，刷隐藏，以及对模块进行单编等。
本文由车护仕电子科技提供
⑤ 如何用宝马诊断软件进行编程和设码
宝马新编程系统ISTA/P通过（FRM/CAS/灯光模块）读出车辆当前配置和当初的车辆订单是否一致，如车辆的底盘号码，车型等，确认一致后，再对车辆上的模块操作程序等级和当前仪器规定的等级对比是否一致，同时显示当前车辆软件等级，对所有没有达到等级的模块要求编程和设码(P/C)，对损坏的模块要求更换（R）
由于内部安装有ETK，所以提示更换时，直接提供旧的零件号和新的零件号码，对安装有许可证书的模块要求提供激活码和证书（A）,证书通过宝马内部网下载，通过U盘，经ISSS数据管理器导入，要想增加车辆配置，如加装DVD同样通过U盘将VO码导入。
⑥ bmw coding tool 是编程的么
是。BMWStandardTools是一款专业的宝马编码套装工具。BMWCodingTool：
1、早期：用于宝马E系列底盘设码文件的封包，导入设码数据、编程数据、检查E系列数据库。
2、后期：由于宝马工程师软件优化升级，现在主要作用为：导入设码数据、编程数据、诊断数据库。
⑦ 汽车编程设码什么电脑好
外星人！！！
⑧ 宝马编程是什么意思
编程是 计算机工程师用电脑编写的程序，叫编程！！宝马编程，就是在汽车计算机编程工程师为宝马汽车或者是为宝马公司的相关产品编译计算机程序，使其达到更好的控制机器的目的，也就是给宝马公司，或者给宝马汽车做的软件编译！就叫宝马编程1！
⑨ 宝马更换后备箱控制模块匹配步骤
你好。建议检查后背箱线路。右边合叶，拆掉后备箱内饰，右边合叶线束磨破（几率很高，宝马车很常见）会导致后备箱无缘无故自己打开。有时候行驶中自己打开。如有疑问欢迎追问。
⑩ 宝马E系工程师编程打开时报错error300是什么问题编程软件打不开，设码可以打开
我明白你说的，因为我修电脑这么多年，遇到几次这种情况。
首先：你是win10系统
其次：你打开文件夹，然后不显示，但是下面那一栏里能显示小图标。弹不出来。
最后：你用鼠标拖一下，一般能出来。
如果：拖不动，就是win10少一个dll,是runck32.dll，下载一个放到system32里面就行。
这种原因有很多，我以前经常给别人远程修这个，从没失手过。
还有最后一种方法：做系统也能解决，不过不是解决问题的根本。